Архив за 17.08.2019

Setup advice

Im look for a better antenna. Preferably one that is on a tripod. Is there one you would recommend or any guides to make one my self (preferably rather buy one but i will make it if needed.). I live in an apartment and it makes it really hard to put an antenna in a good spot since it is also surrounded by trees. My plan is just to go out into an open area and set it up and hook up to my laptop.

submitted by /u/Avonixis
[link] [comments]

That moment when it actually works

That moment when it actually works submitted by /u/sillyinvesterinpx
[link] [comments]

Meteor M2 LRPT 19:25 East evening pass over Caspian sea 🛰

Meteor M2 LRPT 19:25 East evening pass over Caspian sea 🛰 submitted by /u/Macak787
[link] [comments]

Finally got my ads-b antenna above the roof. increased my coverage from 80km to 300km :)

Finally got my ads-b antenna above the roof. increased my coverage from 80km to 300km :) submitted by /u/66kalas
[link] [comments]

Hello I am fixing to buy a Raspberry Pi to use with sdr dongle just wondering if anyone has tried…

Hello I am fixing to buy a Raspberry Pi to use with sdr dongle just wondering if anyone has tried the PI 4 or should I just stick with PI3 B+. I have read the post where people have used 3

(Feed generated with FetchRSS)

NOAA-19 APT 17:05 SNR: 37dB West evening pass over Europe🛰

NOAA-19 APT 17:05 SNR: 37dB West evening pass over Europe🛰 submitted by /u/Macak787
[link] [comments]

Meteor M2-2 16:35 LRPT (IR-CH) OQPSK 72K West evening pass over Europe. 🛰 Black line caused by unknown transmission on LSB of M2-2 SIGNAL. 🛰

Meteor M2-2 16:35 LRPT (IR-CH) OQPSK 72K West evening pass over Europe. 🛰 Black line caused by unknown transmission on LSB of M2-2 SIGNAL. 🛰 submitted by /u/Macak787
[link] [comments]

Comment on METEOR M Demodulator SDR# Plugin and LRPT-Decoder Updated by Happysat

Thanks Admin for posting!

Again some updates..

M2 LRPT Decoder V49:
Fixed a large decoding delay.
Fixed display of input buffer fill indicator.

http://happysat.nl/LRPT_Decoder_v49.zip

Updated Meteor demodulator V2.3. please read howto.txt inside archive.
http://happysat.nl/meteor_2.3.zip

Tutorial will be updated ASAP 🙂

LRPT-Decoder v49 and Meteor Demodulator V2.3

LRPT-Decoder v49 and Meteor Demodulator V2.3

M2 LRPT Decoder V49:

Fixed a large decoding delay.

Fixed display of input buffer fill indicator.

http://happysat.nl/LRPT_Decoder_v49.zip

From Vasili:

Updated Meteor demodulator V2.3.

Added a mode of automatic detection of symbol speed.

In this mode, you can generally remove the term PSK_set_SymbolRate <> from the scheduler or set PSK_set_SymbolRate <Auto>.

Changes practically do not affect the reception quality (in any case, the decoding of my debug files).

Two words about how this all works now:

The plugin first synchronizes with the signal in frequency.

Then, if the automatic speed detection, determines the symbolic flow rate.

If the speed is set - uses it.

Only after synchronization in frequency and symbol rate does the plugin begin to transmit data to the decoder.

In the first block of data, the settings go to the decoder (automatically determined or set).

The decoder, until it receives the settings, is minimized.

After receiving the first data block, the decoder is initialized and begins to work.

Something like this.

without capturing the signal by the demodulator (after all, the reception goes through), the window will not close

Yes, at the moment it is.

Need to fix it!

http://happysat.nl/meteor_2.3.zip

https://i.redd.it/qhnzmg2d21h31.png

submitted by /u/happysat77
[link] [comments]

RTL-SDR Discussion • Re: SDR# issues

radiolistener wrote:
Sat Aug 17, 2019 5:04 am
This error happens due to corrupted memory. It may be due to hardware issue (CPU failure, RAM failure or Motherboard failure). Also it may be due to drivers error or due to mistake in the software.

But since there are no other reports about this issue from other users of SDR#, it seems that the root of cause is in your system. It may be hardware issue, or drivers issue.

This is why I suggested you to test your hardware with memtest86+. If it works ok, then the problem is in your operating system and drivers. If reinstall drivers won't helps, then you're need to reinstall entire windows completely. But don't rush to install all the software, first test if issue still exists on a clean installation. If not, then install next software and try again. In such way you can find problematic software, just remove it. Usually such things caused by some drivers. But first you're needs to make sure this is not hardware fail.

SDRconsole may works with no crash, but it doesn't means that there is no memory corrupt issue, it may be just hidden.
Tried memory test and no issues at all 3 passes.
Honestly my pc seems fine until i use SDR# this is a fresh install of windows barely anything has been installed yet.

I say its a .net issue but given its installed with windows 10 i cant reinstall it to see if that fixes the issue.

Statistics: Posted by wpa2 — Sat Aug 17, 2019 6:30 pm


Перевод
Рубрики
Архивы
Август 2019
Пн Вт Ср Чт Пт Сб Вс
« Июл   Сен »
 1234
567891011
12131415161718
19202122232425
262728293031