Архив за 05.11.2018

Comment on A Complete Linux based Receiver and Decoder Application for Meteor M2 by kmp56

OK, now after right click on image display window and activate “Start Receiver” pop-up menu item it works.
Thanks a lot.
BTW – didn’t found in manual how to start glrpt …

Comment on A Complete Linux based Receiver and Decoder Application for Meteor M2 by Neoklis

I have just uploaded a new version 1.4.1 of glrpt with a modified RTL-SDR initialization sequence, since I was getting error messages from the GTK+ GUI library when testing with the SDR dongle unplugged. glrpt was trying to print information on the SDR device but as it was not plugged in, the strings returned from the driver were apparently uninitialized, causing some trouble!

Neoklis

Comment on A Complete Linux based Receiver and Decoder Application for Meteor M2 by Neoklis

I am not clear about your situation with glrpt. I presume glrpt starts OK,
which means there are no missing dependencies and its working directory is
properly installed in your home directory. If you have the latest RTL-SDR
driver (my version is librtlsdr-0.6.0 in Void Linux), then after launching
glrpt and starting the receiver (right click on image display window and
activate “Start Receiver” pop-up menu item) you should see something like this printed in the console:

Found Rafael Micro R820T tuner
Allocating 15 zero-copy buffers

Otherwise you should get an error message in red in the Messages display.
Also check the librtlsdr Device Index entry in ~/glrpt/glrptrc config file in case the default device index of 0 is not appropriate (if you have more than one RTL-SDR device plugged in).

Sorry about you difficulties!

Neoklis

Comment on A Complete Linux based Receiver and Decoder Application for Meteor M2 by kmp56

I’ve blacklisted rtl dvb driver in /etc/modprobe.d and GQRX works well, so system answer for: “sudo rmmod dvb_usb_rtl28xx” is “ERROR: Module dvb_usb_rtl28xx is not currently loaded”.
Starting glrpt in the console gives NO errors after close.

Comment on A Complete Linux based Receiver and Decoder Application for Meteor M2 by Neoklis

Hi

It may be the DVB driver blocking the RTL-SDR driver. Please run in the console: sudo rmmod dvb_usb_rtl28xxu Then start glrpt in the console and post any error messages.

Neoklis

Antennas • Re: My new DIY Planar disk antenna

Nice build!

Statistics: Posted by rtlsdrblog — Mon Nov 05, 2018 8:50 pm


Troubleshooting Help • Re: Ziadg site down?

It appears to be back now. Sometimes it just goes down for a few hours.

Statistics: Posted by rtlsdrblog — Mon Nov 05, 2018 8:49 pm


Comment on SDR# Update: SpyServer Network Browser now Available by James

Hello,
Thanks for the info. It would be nice to be able to connect to the spyservers in a web browser and to have a simple Android client.

Comment on A Complete Linux based Receiver and Decoder Application for Meteor M2 by kmp56

Ubuntu 18.04 – compilation without errors, but after lunching glrpt won’t see my rtl dongle. Tested with 3 chinese and v3. dongles.

Troubleshooting Help • Ziadg site down?

Hello,

so I am following the nice guide at https://www.rtl-sdr.com/rtl-sdr-quick-start-guide/ to setup RTL-SDR on Win 7 x64. But it seems ziadg.exe is downloading empty. Has the site gone for good?
Capture.PNG
regards,
Imran

Statistics: Posted by imranrajjad — Mon Nov 05, 2018 6:32 pm


Перевод
Рубрики
Архивы
Ноябрь 2018
Пн Вт Ср Чт Пт Сб Вс
« Окт   Дек »
 1234
567891011
12131415161718
19202122232425
2627282930