Архив за 25.01.2018

Troubleshooting Help • Re: Multiple false signals

Here is a screen shot of SDR#

The actual station (BBC Hereford and Worcester) which is being broadcast from the Malvern transmitter on 104mHz which is approx 1 mile from me.

So, with 104mHz tuned on the SDR# and is a nice strong signal of -10, now if I manually scan to the left I then pick up a further 4 signals (100.2mHz, 100.9mHz, 101.5mHz and 102.1mHz)slightly weaker than the 104mHz. Why am I seeing these on the V3/SDR# when they are not actually being broadcast on these frequencies and I can not pick these signals up on my pocket radio (that's why I now they are not being broadcast on these frequencies (100.2mHz, 100.9mHz, 101.5mHz and 102.1mHz)
See the screenshot.
Thanks
BBC.png

Statistics: Posted by snifftheglove — Thu Jan 25, 2018 11:20 pm


Comment on TETRA Decoder Plugin for SDR# Now Available by kika

Crushes fine )

Comment on TETRA Decoder Plugin for SDR# Now Available by Jerzy Szymkiewicz

I set WFM and 48000 sample rate and constantly closes SDR # and says: set WFM and minimum 48000 …

Comment on RTL-SDR Tutorial: Setting up and using the SpyServer Remote Streaming Server with an RTL-SDR by Santi

After install i tried:
pi@raspberrypi:~/spyserver$ ./spyserver
-bash: ./spyserver: cannot execute binary file: Exec format error
pi@raspberrypi:~/spyserver$ sudo ./spyserver
./spyserver: 1: ./spyserver: Syntax error: “(” unexpected
pi@raspberrypi:~/spyserver$
Can you help me please?

Comment on TETRA Decoder Plugin for SDR# Now Available by evgeniy

magic line add key=”Tetra” value=”SDRSharp.Tetra.TetraPlugin,SDRSharp.Tetra”/

Comment on TETRA Decoder Plugin for SDR# Now Available by evgeniy

open Plugin.xml in notepad and paste

Comment on TETRA Decoder Plugin for SDR# Now Available by D

This site is blocking the tags.
“2” should be:
(without spaces)
and
(without spaces)

Comment on TETRA Decoder Plugin for SDR# Now Available by D

More detailed manual:

Install:
———
1) Copy ddl’s to sdr# directory
2) Add magic line to Plugins.xml

Add magic line to SDRSharp.exe.Config:

3) Download and install M-SYS2 from https://sourceforge.net/projects/msys2/
4) Copy contents of msys_root to your M-SYS2 installation directory
5) Open M-SYS2 shell and execute “pacman -S socat”

Use:
———
1) Open M-SYS2 shell and execute command “startrx”
2) Run sdr#.
3) Set mode NFM or WFM and bandwidth 25KHz

Comment on TETRA Decoder Plugin for SDR# Now Available by Anonymous

Not working for me same error as Xanax.

Cheers Kev

Comment on TETRA Decoder Plugin for SDR# Now Available by Mick

2) Add magic line to Plugins.xml

what does it mean ?? can anyone help me please

Перевод
Рубрики
Архивы
Январь 2018
Пн Вт Ср Чт Пт Сб Вс
« Дек   Фев »
1234567
891011121314
15161718192021
22232425262728
293031