Архив за 09.12.2017

Comment on SDRplay Release the RSP1A: A $99 14-bit 1 kHz to 2 GHz Revision of the RSP1 by Juanro

Can you please name us some commercial receivers with this new era of tuners?

Сергей к «Все доступные на этом сайте плагины с кратким описанием»

Здравствуйте!

Подскажите, пожалуйста, будет ли поддерживаться последними версиями SDRSharp SDR приемник ColibriNano от Expert Electonics?

RTL-SDR Discussion • Re: bypass diplexer

remove the transformer T2 and connect to the Q-branch breakout holes in the top right.
Well I have some problem finding those parts on the PCB... Could you please explain a bit more where they are?

Statistics: Posted by royae — Sat Dec 09, 2017 10:21 pm


RTL-SDR Discussion • Frequency correction (ppm) and Spy Server

So my cheap RTL2832U & R820T2 dongle needs about 32ppm frequency correction. It all works well on my local machine but how to get it working with the Spy Server? I've tried this:

frequency_correction_ppb = 32

In the spyserver.config file but that didn't work. Any ideas?

Statistics: Posted by jevgienij — Sat Dec 09, 2017 9:17 pm


Наигрался, пришел аирспай, кому нужно, продам приемник v3, фильтр ФМ и антенну, за все 2000р….



Наигрался, пришел аирспай, кому нужно, продам приемник v3, фильтр ФМ и антенну, за все 2000р.

Satellite Tracking Not Working with SDR#

I'm using SDR# v1.0.0.1629 Tracking DDE Client v.1.2 and Orbitron 3.71

I have everything set up correctly, to the point that DDE Client shows the frequency changes that SDR# should tune to as the satellite moves, and my AOS has the following:

radio_modulation_type<WFM> radio_bandwidth_Hz<38000> radio_tracking_frequency_On radio_center_frequency_Hz<137620000> 

(I added the last one to see if it would help, it does not.

But it never controls frequency. There seems to be something I'm not doing correctly, but I'm not sure exactly what it is.

TL;DR DDE receives tracking frequency info from Orbitron but does not control SDR#

EDIT Also, for anyone searching, it seems you must run Orbitron as Admin as a rule for that program, thus for SDR# to communicate, it also must be run as Admin.

submitted by /u/ahughesart
[link] [comments]

Comment on The Open Source OVI-40 SDR Transceiver by DF8OE

actually not planned. Maybe later providing a SPI or parallel interface to special LCDs – but not monitors.

продам Grundig Yacht Boy 400 или обменяю на Yaesu VR-500 с моей доплатой. 1500 руб…



продам Grundig Yacht Boy 400 или обменяю на Yaesu VR-500 с моей доплатой. 1500 руб

Comment on Using our new Dipole Antenna Kit by Art

This antenna is quite good at RDFing. It arrived today and I’ve already tracked down a 937 MHz transmitter 15 km away and a 450 MHz signal 85 km from me.

I hope that you are still working on the triple coherent receiver project – this dipole is good, but a proper RDF setup would be better!

Comment on NOAA using the SDRplay RSP2 and RTL-SDR for Receiving Weather Balloon Data by Max

I was totally unaware about standards so i received a radiosonde on 404.200 MHz, i installed SkySonde server+client but it did not decode it. Soon i discovered that there are different brands with different standards so i installed SondeMonitor.
Here is what i received a few minutes ago.
Still have to lean how to trace the path on a map

Перевод
Рубрики
Архивы
Декабрь 2017
Пн Вт Ср Чт Пт Сб Вс
« Ноя   Янв »
 123
45678910
11121314151617
18192021222324
25262728293031